Cleaning And Maintenance; Important Assembly Information - Tunturi RC20 Pro Power Rack Manuel De L'utilisateur

GB
Index
Welcome ...................................................................4

Important assembly information ..............................4

Before you start ������������������������������������������������������������������������������4
Description illustration A ����������������������������������������������������������������4

Cleaning and maintenance ........................................4

Defects and malfunctions ���������������������������������������������������������������4
Additional information �������������������������������������������������������������������4
Disclaimer .................................................................4
Welcome
Welcome to the world of Tunturi!
Thank you for purchasing this piece of Tunturi equipment�
Tunturi offers a wide range of home fitness equipment, including
crosstrainers, treadmills, exercise bikes, rowers, strength benches and
multi stations� The Tunturi equipment is suitable for the entire family,
no matter what fitness level� For more information, please visit our
website www�tunturi�com
Important Safety Instructions
The Tunturi RC20 Pro Power Rack - Ball Pull-Up Grips� is an accessory
for the RC20 Cross Fit Rack-Base Rack and cannot be used as a stand-
alone trainer or station� We therefore refer to RC20 Cross Fit Rack-
Base Rack manual for safety and warranty information as you cannot
find in this assembly manual�
You can download the User manual for the RC20 Cross Fit Rack-Base
Rack from our website at all times�
The Owner's Manual is an essential part of your training equipment:
reading all instructions in this manual before you start using this
appliance� The following precautions must always be followed:
Important assembly information
Before you start
We recommend to use two adjustable wrenches to assemble your
product� If you have metric sized wrenches in correct size this is fine
too�
‼ NOTE
• Suitable adjustable wrenches are "NOT" provided with the
product, neither included in the assembly kit�
• It is strongly recommended that this equipment is assembled by
two or more people to avoid possible injury�
- Ensure Carriage Bolts are inserted through the SQUARE holes on
components that need to be assembled� Attach washer only to end
of the Carriage Bolt�
- Use Allen Bolts or Hex Bolts inserted through the ROUND hole on
components that need to be assembled�
- Always wait until all bolts are assembled onto the bench before
tightening the bolts�
Description illustration A
The illustrations shows you in the correct following order how to
assembly your trainer best�
‼ NOTE
• Part numbers shown in the assembly steps are commencing
with the spare part drawing that can be found in the online full
version user manual�
• It is recommended to locate the Ball Pull-UP Grips at a location
where it feels comfortable to use�
⚠ WARNING
• Assemble the equipment in the given order�
Cleaning and maintenance
- Inspect and tighten all parts before using the equipment�
- The equipment can be cleaned using a damp cloth and mild non-
abrasive detergent� DO NOT use solvents�
- Examine the equipment regularly for signs of damages or wear�
- Replace any defective components immediately and/or keep the
equipment out of use until repair�
- Failure to examine regularly may affect the safety level of the
equipment�
Defects and malfunctions
Despite continuous quality control, defects and malfunctions caused
by individual parts can occur in the equipment� In most cases, it will
be sufficient to replace the defective part�
- If the equipment does not function properly, immediately contact
the dealer�
- Provide the model number and the serial number of the equipment
to the dealer�
- State the nature of the problem, conditions of use and purchase
date�
Additional information
Packaging disposal
Government guidelines ask that we reduce the amount of waste
material disposed of in land fill sites� We therefore ask that you
dispose of all packaging waste responsibly at public recycling centres�
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from
your fitness trainer� However, a Time will come when your fitness
trainer will come to the end of its useful life� Under 'European WEEE
Legislation you are responsible for the appropriate disposal of your
fitness trainer to a recognised public collection facility�
Disclaimer
© 2020 Tunturi New Fitness BV
All rights reserved�
- The product and the manual are subject to change�
- Specifications can be changed without further notice�
- Check our website for the latest user manual version�
4