System Setup - Honeywell 9000 Serie Guide D'installation

System setup

From the home screen, touch
System Setup
System Setup Options (MENU > System Setup)
Screen Title
Language
Thermostat installed
in
Your thermostat
location
Your thermostat
controls
Your system type
Your forced air
heating system type
Efficiency of your
heating system
Your heating system
type
Number of cooling
stages
Number of heating
stages
Your fan control
Type of changeover
valve
Number of heat
pump compressor
stages
Your backup heat
Menu System Setup
>
MENU
Settings and Options
English/Français/Español.
Home/Business (Thermostat is used in a residential (default) or commercial
setting).
THERMOSTAT
Touch button to display a screen where you can enter a custom
name using a keypad. If you have only one thermostat, you can leave the
name as THERMOSTAT. For business installations you can check a box to
display the thermostat name on the home screen.
Select Heating or Cooling or both (default).
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option
offers different choices on the following screens.
Select how your forced air system is powered: Gas/Oil (default) or Electric.
Select Standard Efficiency Forced Air (default) or High Efficiency Forced Air.
If you selected Hot Water or Steam on "Your system type," select the specific
heating system here.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: 'Y' wire only (1 stage) or 'Y' and 'Y2'.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: 'W' wire only (1 stage) or 'W' and 'W2'.
Select whether your thermostat (default) or heating system controls the fan.
If you selected Heat Pump on "Your system type," select whether it uses a
cooling changeover valve (default) or heating changeover valve.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires are
connected: 'Y' wire only (1 stage) or 'Y' and 'Y2'.
No or Yes (default)
to modify the initial system setup.
7
Next
69-2815EFS—05