Hydroworks 8489106 Manuel D'instruction

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS
before operating. Failure to follow the safety rules and other basic safety precautions may
result in serious personal injury.
Model No.: 8489106, 8489114, 8489122, 8489130, 8489148, 8489155
12V DC LINEAR ACTUATOR
INSTRUCTIONS MANUAL
Heavy-duty Linear Actuator can be used in a variety of outdoor and indoor applications. Perfect for raising and
lowering lawn and garden tractor and ATV attachments along with hoods, trunks, tonneau covers, tailgates,
truck covers and more!
This item is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this item not be modified and/or used for any
application other than that for which it was designed.
SPECIFICATIONS:
Item No. 8489106
Stroke (inches) 4
Retracted Length (Inches) 13.82
Gear Ratio
Load Capacity (Lbs.)
Static Load (Lbs.)
Speed at Max. Load (inches/second)
Speed at No. Load (inches/second)
Current draw at Max. Load (Amps)
Duty Cycle
Operating Temperature Range (°C/°F)
Mounting Hole Diameter (inches)
Limit Switches/Overload Protection
Recommended Fuse Size (Amps)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may
result in serious injury.
CAUTION: Do not allow persons to operate or assemble this linear actuator until they have read this
manual and have developed a thorough understanding of how the linear actuator works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
SPECIFIC WARNINGS AND PRECAUTIONS
1. Read and understand the manual before using this linear actuator.
2. Test the 12V DC power source to make sure it has sufficient voltage and amperage to operate the linear
actuator.
3. Make sure the motor has fully stopped before changing directions. If you change directions when the motor is
running it may damage the motor.
4. Do not attempt to extend or retract the linear actuator by hand. This could damage the actuator.
12V DC LINEAR ACTUATOR
INSTRUCTIONS MANUAL
8489114 8489122 8489130 8489148 8489155
6 8 12 18
15.83 17.83 21.85 27.83
20:1
900
1,350
0.39
0.71
16.7
25%
-26 to 65°C/-14.8 to 149°F
1/2
Built in Limit Switches and Overload protection
20
1 OF 3
24
33.88