Before You Begin; Parts Included; Tools And Parts Needed; Cabinet Requirements - Bosch HEZ9YZ30UC Manuel D'installation

Before You Begin

Industrial Style Range
HGS8055UC, HDS8055U,
HDS8055C
HGS8045UC, HDS8045U,
HDS8045C
HGS8655UC, HDS8655U,
HDS8655C
HGS8645UC, HDS8645U,
HDS8645C

Parts Included

Tools and Parts Needed

Phillips head screwdriver
▯
Gloves
▯

Installation Procedure

Remove any protective film.
1.
Remove the 4 screws shown in the diagram below
2.
and retain for step 3.
4
B e f o r e Y o u B e g i n
Backguard
HEZ9YZ30UC
HEZ8YZ30UC
HEZ9YZ36UC
HEZ8YZ36UC
I n s t a l l a t i o n P r o c e d u r e

Cabinet Requirements

Low Backguard Installation (applicable both with non
combustible back wall and combustible back wall)
Option 1: A >= 12'' (305 mm) and B >= 28'' (711 mm)
▯
Option 2: A >= 28'' (711 mm) and B >= 12'' (305 mm)
▯
* purchased separately
** Clearances from non-combustible materials are not
part of the ANSI Z21.1 scope and are not certified by
Intertek. Clearances of less than 3'' (76 mm) should be
approved by the local codes and/or by the local authority
having jurisdiction.
Fit the backguard over the backtrim and affix with the
3.
4 screws removed in step 2.