Connectors; Power Sources; Ac Line Operation/Charging - TTI PSA-T Serie Instructions

1.3ghz & 2.7ghz rf spectrum analyzers
Table des Matières

Publicité

Recall Set-up:
Store Screen:
Store/Recall Limit
Lines

6.8. Connectors

RF Input Connector:
Power Connector:
USB Connector:
Audio Connector:

6.9. Power Sources

AC Line Operation/Charging

The PSA1301/2701T can be operated from mains power using the AC power adaptor provided by TTi.
This powers and recharges both the Spectrum Analyzer and the Palm T
AC Adaptor/Charger
Input Voltage Range:
Battery Operation
The PSA1301/2701 and the Palm T
PSA1301/2701 is turned off automatically whenever the PSAnalyzer program is exited, or when the Palm
|
T
X is turned off.
PSA1301/2701 Spectrum Analyzer
Battery Type:
Battery Life:
Recharge Time:
Palm T|X
Battery Type:
Battery Life:
Recharge Time:
Auto Sleep Mode
To conserve battery life, the system can be set to automatically switch into sleep mode after a defined time
from the last key press. This can be set between 5 mins and 60 mins (or never).
Recalls any stored set-up, overwriting the existing settings of the instrument.
This function copies the whole screen area to memory as a bit-map. Any
number of screens can be stored under either default file names or user
entered file names. Screen bit-maps can be viewed using the "Media"
application of the Palm T
Any number of limit lines can be stored under either default file names or user
entered file names, and recalled as required.
Standard SMA connector.
1.3 mm dc power socket (centre positive) for 5.2V/1A external AC power
adaptor/charger as supplied by TTi.
Mini USB connector (5 pin mini B) which provides direct access to the USB port
of the Palm T
|
X.
3.5 mm jack socket for demodulated audio out (accepts mono or stereo plugs).
100V to 240V nominal 50Hz/60Hz. Interchangeable plus for UK, Euro, USA
and Australia are supplied.
|
X contain their own internal rechargeable battery packs. The
Ni-Mh 3.6V 700mA-hr (3 x AAA cell)
> 5 hours continuous operation (PSA1301)
> 4 hours continuous operation (PSA2701)
< 3 hours from fully discharged
Li-ion 3V 1050mA-hr
Typically 4 hours continuous operation (depending on backlight brightness)
< 4 hours from fully discharged
|
X, or transferred to a PC for printing.
|
X simultaneously.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Psa1301tPsa2701t

Table des Matières