Mode Selection - Atlantic Color Changing Colorfalls Manuel D'utilisation

Remote Control Functions
On Button
Touch and release to turn
the lights on. Touch for two
A
seconds to switch between
Color Wheel and Preset
Light Changing Modes
B Off Button
C Color Wheel
D Indicator Light
E Brightness (Up)
Preset Light Changing Modes
Continuous full spectrum
1
fade change
2
Solid Crystal White
3
Solid Red
4
Solid Green
5
Solid Blue
6
Solid Aqua
7
Solid Purple
8
Solid Yellow
9
Red-Green-Blue jump change

Mode Selection

• To switch to the Color Wheel: hold the A button for two seconds and the light
will return to the last color displayed while in the Color Wheel mode. Run your
finger around the color wheel to select a new color.
• To switch to the Preset Light Changing Modes: hold the A button for two
seconds, and the light will return to the last preset mode displayed while in the
Light Changing Modes. Press the I and J button to switch between the different
preset modes.
Changing the Brightness and Speed
In all modes, you can use the E and F keys to change the brightness of the light.
In all modes, you can use the G and H keys to change the speed of the light
transitions. There are 10 levels for each.
Synchronizing the Remote to the Control Unit
If the remote control stops working properly, please install fresh batteries. If
problems persist, the remote may need to be re-synced to the control module.
6
F Brightness (Down)
G Speed (Up)
H Speed (Down)
Preset Light Changing
I
Mode Selection (Up)
Preset Light Changing
J Mode Selection
(Down)
10
11
12
13
14
15
16
17
18
A
C
G
E
F
H
7 color jump change
Red-Green-Blue dimmer change
7 color dimmer change
7 color dimmer then
7 color jump change
Crystal White fade on/off
Flashing Red
Flashing Green
Flashing Blue
Flashing Red and Blue
B
D
I
J