Whalen WSLPOS Mode D'emploi page 3

ASSEMBLY INSTRUCTIONS
1. Attach Elbow (B) and Base (C) to assembly.
Note:Base should be firmly tighten.
Option #1
2. For wooden stud wall installations, Using a stud
finder (not included), find 2 stud locations in the wall
and mark them with a pencil (not included). Draw a
level line at the desired installation height for shelf (A).
3. Secure Base (C) to the wall at marked stud lo-
cations with M4 x 50 mm wood screws (AA).
Hardware Used
M4 x 50 mm
AA
Wood Screw
1
C
B
2
Level Line
Stud Locations
3
AA
C
x 8
B
4
ASSEMBLY INSTRUCTIONS
Option #2
4. For drywall installations, drill a 3/8 in. pilot hole and
then marked location.
5. Insert drywall anchor (CC) until flush in the hole. Se-
cure Base (C) to the wall over the anchor with M4 x 50
mm wood screws (AA).
Hardware Used
M4 x 50 mm
AA
Wood Screw
CC
Drywall Anchor
6. Attach Elbow (A) to Base (C) from underneath
using M4 x 20 mm screws (BB).
Hardware Used
BB
M4 x 20 mm Screw
4
Stud Locations
5
AA
C
x 8
x 8
6
BB
A
x 8
C
5
CC
B