Important Warnings; Maintenance And Cleaning - Daga WH-400 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
ENGLISH

IMPORTANT WARNINGS

Prior to plugging in the product, check that your mains voltage is the
same as the one indicated on the product label.
Do not use ,connect or disconnect the device to the mains with your
hands or feet wet.
Do not use any accessories other than those supplied.
The mains connection cable must not be tangled or wrapped around
the product during use.
Do not pull on the connection cord in order to unplug it.
Proceed according to the conservation and cleaning section of this
manual for cleaning.
Unplug the product immediately from the mains in the event of any
breakdown or damage and contact an authorised Technical support
service.
In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official Technical
support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render
the warranty null and void. Only an authorised technical support
service centre may carry out repairs on this product.
B&B TRENDS SL. disclaims all liability for damages that may occur to
people, animals or objects, for the non-observance of these warnings
INSTRUCTIONS FOR USE
Turn the product by selecting the temperature control (C), turning
it in a clockwise direction, inserting the desired wax tablet(s) in the
removable or metal container, removing the removable container and
inserting it directly Move the temperature control to the maximum
position so that the wax melts and then leave it in the mid position to
allow the wax to be maintained.
Turn off the heater by turning the temperature control in an anti-
clockwise direction.

MAINTENANCE AND CLEANING

Unplug the product when you do not intend to use it for an exten-
ded period of time to prolong its shelf-life. Cover the device with a
cover to prevent any dust entering. Allow the device to cool down
prior to storage.
Remove any wax remains from the container by be done when it is
slightly hot so that the wax does not stick.
Ensure that the device is unplugged prior to cleaning it.
This device may only be cleaned with a damp cloth, and chemical
products must never be used for the same.
9

Publicité

Table des Matières
loading

Table des Matières