Usage Tips - Remington protect&shine shine therapy S-4444 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Usage Tips

Straightening Your Hair
1. Hair should be dry and free of
tangles before using the styling iron.
2. Plug the styler into an electrical
outlet. Press and hold the ON/OFF
button until the unit turns on and the
LED lights up.
3. Adjust the temperature using the
temperature dial. The ready light will
flash while the unit heats up, then
glow steadily when it has reached
the selected temperature.
4. Divide hair into manageable sections
and clip the upper layers on top of
your head and out of the way. Work
with underneath layers first.
5. Test the styler on a small section of
hair, then adjust the temperature up
or down before styling the rest of
your hair.
NOTE:
■ If you find that you need a higher
setting while straightening your hair,
simply adjust the temperature to a
higher heat setting.
■ While straightening your hair, if you
find that you need a lower setting,
adjust the temperature to a lower
heat setting. Because the unit is
already hot, it may take a few
minutes to cool off.
6
35208_S-4444_IB.indd 6-7
All manuals and user guides at all-guides.com
6. Take a small section of hair and pull
hair down and away from your scalp,
and hold it taut.
7. Starting at the roots, clamp hair
firmly between the plates and run
the styler down the entire hair
strand, from root to tip, in one
smooth stroke. Do not hold it in one
area for a long period of time or
damage to hair may occur.
8. To create curves or flicks, rotate your
wrist to turn the iron in toward your
head or out away from your head
as you run the iron down the hair
strand.
9. Repeat with all the sections of your
hair, working with the underneath
layers first, then the top and sides.
10.When you are finished styling, press
and hold the ON/OFF button to turn
the unit off, unplug it, and allow it to
cool before storing.
NOTE:
DUAL VOLTAGE APPLIANCE
■ Confirm the voltage available at each
overseas location before using the
appliance. For connection to a 240-
volt supply, use an attachment plug
adapter of the proper configuration
for the power supply receptacle.
Maintenance
Cleaning
■ Make sure the unit is unplugged and
cool. Use a damp cloth to clean the
plates and the outside of the power
handle. No other maintenance of the
unit is required.
Performance Guarantee
Full Four-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship
for a four-year period from the original
date of consumer purchase. This
warranty does not include damage to
the product resulting from accident or
misuse.
If the product should become defective
within the warranty period, we will
repair it or elect to replace it free of
charge. Return your product and sales
receipt with your name, address and
day time phone number to: Spectrum
Brands, Inc., Attention: Consumer
Services, 601 Rayovac Drive, Madison,
WI 53711. For more information call
800-736-4648.
Storage
Unplug the unit whenever it is not
in use. Allow it to cool, then store it
out of reach of children in a safe, dry
location.
Never wrap the cord around the
appliance, since this will cause the
cord to wear prematurely and break,
thus voiding warranty. Handle the cord
carefully and avoid jerking, twisting,
or straining it, especially at plug
connections.
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
This warranty does not cover products
damaged by the following:
■ Accident, misuse, abuse or alteration
of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current
and voltage
■ Wrapping cord around appliance
causing premature wear & breakage
■ Any other conditions beyond our
control
No responsibility, obligation, or liability
is assumed for the installation or
maintenance of this product.
11/29/07 9:46:10 AM
7

Publicité

Table des Matières
loading

Table des Matières