Display Controller Operation - Piscine Center PLATINIUM 095 Manuel D'utilisation

PLATINIUM 255, PLATINIUM 305
NOTE:
(1)Above electrical wiring diagram for your reference.
(2)The swimming pool heat pump must be connected earthed, although the unit heat exchanger is electrically isolated
from the rest of the unit. Grounding the unit is still required to protect against short circuits inside the unit. Bonding
is also required.
(3)It is recommended that your pool filtration pump and your heat pump are wired independently.
Disconnect: A disconnect means (circuit breaker, fused or un-fused switch) should be located within sight of and
readily accessible from the unit. This is common practice on commercial and residential heat pumps. It prevents
remotely-energizing unattended equipment and permits turning off power at the unit, while the unit is being serviced.

6. Display Controller Operation

6.1 Guide for operation
55