NIFICHE NFKV701 Manuel D'instructions page 37

After placing the appliance, leave it for at least 3 hours
before inserting the plug in the socket. First clean the interior
of the appliance. Use warm soapy water with, for instance,
washing-up liquid, all-purpose cleaner or soda. Wipe the inside
of the appliance after cleaning with clean water and
properly wipe everything dry. Leave the appliance to dry for
1 to 2 hours.
USE
The control unit of the appliance is located on the inside.
Check that the thermostat is on [ 0 ]. Check that the voltage
corresponds with the voltage stated on the information plate
and insert the plug in the socket.
Set the temperature with the thermostat and select a position
between 1 and 7. We recommend setting the appliance to
position 3 or 4. The appliance will now cool continuously until
the set temperature has been reached. Allow the appliance to
reach the set temperature, before filling it with food. Usually this
will take 2 to 3 hours. After that, you can set the thermostat to
the required position and fill the appliance with food.
Stand 1 = warm, lowest capacity
Stand 7 = cold, highest capacity
If the ambient temperature rises, set the appliance to a higher
position in order to be able to guarantee the interior
temperature.
Set the thermostat to [ 0 ] to switch off the appliance.
3 4