DELTA DORE K-LINE TYDOM 1.0 Notice D'installation page 2

TYDOM 1.0
Installation instructions
EN
K•LINE
- CS 40129
85501 Les Herbiers Cedex
Tél. : 02 51 66 70 00
Fax : 02 51 66 98 66
www.k-line.fr
INPUT 100-240V~ 50-60 Hz 0,3A
OUTPUT : 5V 1.0 A
-20°C / +70°C
-10°C / +40°C
IP IP 30
100 x 100 x 27 mm
The connection quality of the product may be affected by diffe-
rent modifications of the IP architecture on which it operates.
These modifications can be, but are not limited to, a change
of hardware, a software update or configuration, work conduc-
ted on your operator's equipment or any other multimedia
equipment such as tablets, smartphones, etc." Android™ and
Google are registered trademarks of Google Inc. IOS™ is a
registered trademark of Cisco Systems Inc. WiFi is a trade-
mark by Wireless Ethernet Compatibility Alliance. Because
of changes in standards and equipment, the characteristics
given in the text and the illustrations in this document are not
binding unless confirmed.
5 6 7
Examples of associations :
- Lock detector
- K•LINE alarm pack
- K•LINE Shutters
1
A
C
3
3.1
ADSL BOX
Download the K-LINE
3.2
Smart Home application
1
3.3
MAC : 001A25
3
New home Identifier
1 2 3 4 5 6 7 1 2
Information and support
LED System status
Pulsing System accessible
green locally and remotely,
user connected
Green on System accessible
and steady locally and remotely
Pulsing System accessible
orange locally, user connected
Orange on System accessible
and steady locally
Red on No IP address
and steady allocated
Launch
the application
Press on Select
"Settings" "My devices"
Services
2
E
B
D
2
C B
ADSL BOX
xxxxxx
4
Identifier
2
3 4 5 6 7
1 2 3
Diagnostic function
Briefly press the button
(LED displays for 10 seconds)
Flashing
Fixed IP OK
yellow
Flashing
DHCP OK / Upnp OK
blue
DHCP OK / Upnp Error
Flashing
Check the Upnp
blue (2x)
activation on the BOX
DHCP in progress
Flashing
Check the DHCP
blue (3x)
activation on the BOX
Flashing No network connection
red Check the Ethernet link
Doors
Select
«Add a detector»
the device
to add
Select
«Add a device»
K LINE alarm pack
•
Alarm
Select the type
of product
to associate
Roller shutters
SÉLECTIONNEZ UN ÉQUIPEMENT
K LINE Shutters
•
K-LINE Activ'Home ®
1 2
Contents
A. Home automation gateway for application on
K-LINE Smart Home smartphone and tablet
B. Mains supply
C. Ethernet cable
D. Installation instructions
1 2 3
Description
E.
System status display LED
F G H I
Connections:
F. Ethernet socket
G. Not used
H. Mains adaptor socket
C
Button:
B
I. Configuration/information button
1 2 3 4
Installation
3.1 Connect the home automation gateway
according to your installation
3.2 Download the K-LINE Smart Home application
• Activate the WIFI connection of your
smartphone or tablet.
2 • According to the unit:
Log in to Google play or App Store
• Search for and download the free K-LINE Smart
Home application
3.3 Configure the K-LINE Smart Home application
Ê Note down the last 6 characters of the MAC
address of your home automation gateway.
Ë Open the K-LINE Smart Home application.
5 Ì Press "New home"
then "Identifier".
00801E
Í 1- Enter the 6 characters (upper case letters) in
2- Confirm then select "Add".
Î Press "CONNECTION".
Add During the first connection, follow the instructions
CONNECTION
on the screen to choose your password, then press
'CONTINUE'.
The home screen appears. You are connected.
4 5 6 7
Advanced functions
DHCP/Fixed IP
Press the button for at least 3 seconds
LED Action
Flashing
Release the button
magenta
(before 15 seconds)
(slowly)
Preferably use the K-LINE Smart Home
application to access this function.
Delete password
Press the button
for at least 15 seconds
LED Action
Flashing
Release the button
magenta
(before 30 seconds)
(rapidly)
Select Select the type Follow the instructions
of product on the screen.
to associate
Product
is associated
Follow the instructions
Press
«TO ASSOCIATE»
1 Device found
Follow the instructions on the screen.
Press «TO ASSOCIATE»
3 4 5 6 7
4 5 6 7
5 6 7
the "identifier" field.
RESET
Press the button
for at least 30 seconds
LED Action
Release the button
System Use of DHCP
status Password deletion
Association removal
The device is associated
Press «Finish»
The device is associated
Press «OK»