Electrolux BEAM Alliance Q Manuel page 5

POWERBRUSH PARTS IDENTIFICATION
Height Adjustment LED Indicator
LED Lights
ASSEMBLY & OPERATING INSTRUCTIONS FOR THE POWERBRUSH
When using the powerbrush, the basic precautions outlined under "IMPORTANT SAFETY
INSTRUCTIONS" should always be followed.
1. Push the wand into the powerbrush socket until it locks in place. The wand
socket is designed with a positive stop. Therefore, the wand will not jam
in the wand socket. Insert hose end into the powerbrush wand on the
assembled powerbrush until is locks in place. (figure 3)
2. Make sure the hose handle button is OFF. Note: The handle is in the OFF
position when the indicator in the (
3. Insert the hose into the wall inlet valve (faceplate), and plug the cord into the
electrical outlet. (figure 4)
4. Lower the wand from the upright position.
5. To turn the central vacuum ON, press the (
6. To turn on the powerbrush, press the powerbrush button (
turn it on.
7. To turn off the powerbrush, press the symbol Powerbrush (
button. The indicator in the icon will turn off.
All manuals and user guides at all-guides.com
Height Adjustment Pedal
Phoenix :: CUI1 & 2G
) button is OFF.
Power Button
(Phoenix & 2G)
Status OK
Left Scroll 2G-to-Unit Connection
Right Scroll Time
Enter Error Code
Call for Service
Phoenix :: CUI1 & 2G
Attention Needed
Power Button
(Phoenix & 2G)
Status OK
Phoenix :: CUI1 & 2G
Power Level Button
Left Scroll
(2G)
Power Button
(Phoenix & 2G)
Right Scroll
Left Scroll
Phoenix :: CUI1 & 2G
Enter
Power Button
(Phoenix & 2G)
Right Scroll
Attention Needed
Left Scroll
Enter
Right Scroll
Attention Needed
Enter
Attention Needed
Figure 2.
Power Nozzle Button
(2G)
Power ON/Power Level
(2G)
Performance Level
Bucket Level
Power Nozzle Button
(2G)
Motor Running
) button.
Status OK
Power Nozzle Button
Screensaver
2G-to-Unit Connection Power ON/Power Level
(2G)
) to
(2G)
Performance Level
Status OK
Time
2G-to-Unit Connection Power ON/Power Level
(2G)
Power Nozzle Button
(2G)
)
Performance Level
Error Code Bucket Level
Call for Service
Status OK Time
Motor Running
2G-to-Unit Connection Power ON/Power Level
(2G)
Error Code Bucket Level
Status OK
Call for Service
Performance Level
Power Level Button Screensaver
Time
(2G)
Motor Running
Status OK
Error Code Bucket Level
Call for Service
Power Level Button Screensaver
(2G)
Motor Running
Status OK
Quick Release Neck
Circuit Breaker Indicator
(glows red in color for
a stalled or jammed
condition)
Handle Release Pedal
Figure 3.
Figure 4.
5