On Screen Settings; Tv Connection - Nyrius NIPV800 Guide De L'utilisateur

Using the on screen display setting buttons you can adjust the look of the
picture on the screen by adjusting the brightness, contrast, color, and tint; you
can also set the player back to its default settings.
1. Press the menu button located below the player's screen to select and
adjust the brightness, contrast, color, tint or reset.
2. To adjust the chosen setting, press the "+" and "-" buttons located below
the player's screen.
3. The player will go back to regular operation on its own after a few moments
when buttons are no longer being pressed.
When connected to an AC power outlet the player will charge your iPod or
iPhone, your iPod/iPhone will also charge if you are running on the unit's
internal battery.
1. Plug the included AC adapter into the DC input on the right side of the
player.
2. Plug the other end of the AC adapter into a 120V wall outlet.
3. Slide the power switch on the right side of the player to the ON position.
4. Install the correct player adapter according to your type of iPod/iPhone.
5. Install your iPod or iPhone into the players iPod/iPhone connector.
6. Using the controls on your iPod or iPhone, select which song or movie
you would like to play.
7. You can adjust the volume using the thumbwheel on the right side of the
player.
8. You can also listen to the media with headphones (not included) plug the
end of the headphones into the headphone jack on the right side of the
player.
Note: When music operation is chosen there will be no picture or video shown
on the player's screen
1. Connect the single end of the included RCA cable to the AV out jack on
the right side of the player.
2. Connect the three audio and video connections to the AV inputs on the
back of your TV.
3. Ensure that you are following the correct color coding on the AV plugs
for the player to function properly.

ON SCREEN SETTINGS

DOCK OPERATION

TV CONNECTION

- 4 -