Channel Scan; Network Settings; Restore Default Settings; Firmware Update - Avermedia AVerLife HD Theater Guide D'utilisation

AVerLife HD Theatre
All manuals and user guides at all-guides.com
ENG-12

Channel Scan

Use the Auto Scan function first. If there are
channels missing after you perform Auto Scan, use
Frequency Scan function and repeat the searching
process.
The "Auto Scan" box will appear, indicating
the scanning percentage, Channel Number and
Frequency. When scanning, active TV/Radio programs
will be listed inside the box. After channels are
scanned, the system will return to the real-time
program automatically. To terminate the scanning,
press "Cancel".
Select Manual Scan for specific frequency scan. Use
▲ or▼ to toggle between adjustable options. Use
number buttons to input the frequency and ◄ or ► to
change the band width value. Press Scan to start scan.

Network Settings

In "IP", choose "Static" to customize the IP settings or
"DHCP" to automatically configure the available IP
address. Press OK to confirm.
*Press red button on the remote to input . (dot).

Restore Default Settings

If you do want to revert to the factury settings,
choose "YES".
A confirmation dialog will appear. Select "OK" and
press OK to confirm the operation, or select "CANCEL"
and press OK.

Firmware Update

Use this function to update the firmware via USB
storage or the Internet.
System Info.
Provide the information about this product, such as the
product name and firmware version etc.