Connecting The Power Cord - Hiti P750L Manuel De L'utilisateur

Chapter 2. Installing and Set Up

Connecting the Power Cord

Connect the power cord according to the safety instructions below.
Warning: Make sure to turn off the power of the printer before inserting the power cord.
Warning: Make sure to insert the power cord correctly. Incorrect insertion may cause
the fire or the printer problem.
Warning: Do not insert or remove the power cord with wet hands. It may cause electric
leakage.
Warning: Do not damage or make any modification to the power cord. Misusing, such
as putting the heavy items on the power cord, giving a strong pull to the power
cord and twist the power cord may cause the fire and electric shock.
Warning: When moving the printer, make sure to turn off the power of the printer, remove
the power cord in order to have no connection with other devices. Otherwise,
the power cord might be damaged and it can cause the fire and electric shock.
Also there is a possibility to fall down caught by the cord.
Warning: For the safety consideration, please remove the power cord from the printer if
the printer is not to be used for long time.
Warning: Please avoid "piled up" connection which may cause the fire and electric shock.
Connect the printer power cord to the rear side of printer
body and then plug it into the power outlet.
2 - 3
HiTi P750L user manual