Avidsen 123288 Mode D'emploi page 29

SMTP server: varies with the email provider of
1
the address sending the alert. In our example,
using Gmail, smtp.gmail.com
Server port: depends on the email provider of
2
the address sending the alert. I our example
using Gmail, 587
Security type: security when logging in,
3
associated with the email provider. In our
example using gmail, STARTTLS
Authentication: indicates whether the SMTP
4
server used requires a username or password
to connect. In our example, this must be
activated.
Username: Name that you should enter to log
5
in to the email box which will send the alerts.
In our example using Gmail, this is the sender
address: sender-address@gmail.com
720P WiFi iP vcamera
1
2
3
4
5
6
7
8
9
10
11
12
d - CONFiGurATiON
Password: The password used to log in
6
to sender-address@gmail.com, in our
example
Send to: Enter the email address here that will
7
receive the alerts. In our example:
addressee@gmail.com
Sender: Name that you should enter to log in
8
to the email box which will send the alerts. In
our example using Gmail, this is the sender
address: sender-address@gmail.com
Subject: subject of the email alert
9
Message: body of the email
10
Test: allows you to simulate an alert, send
11
an email and to check that your camera is
correctly configured.
Click on "Appliquer" (Apply) to save your
12
settings.
Note: it does not matter who the email provider
of the recipient is, as it is the email provider of the
sender that dictates what needs to be entered.
However, you must ensure that the alerts are not
treated as spam by the recipient's inbox.
When you have finished configuring your camera,
it will be able to send emails. Next, it is time to
configure when it does so, in the
"Action sur alerte" (Action upon alert) menu in
the camera settings:
en en
11