Télécharger Imprimer la page

Ordering Information; Use; Specifications; Maintenance - AEMC Instruments PEL Serie Notice De Fonctionnement

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

PEL Power Adapter for use with Model PEL102 and PEL103 ..............................................Cat. #2137.77

The power adapter is used to supply the device when it is used for an extended period. The internal battery

of the PEL remains charged, enabling the device to continue to operate in the event of a power outage

up to a half-hour.

■

Connect the adapter to the voltage inputs of the PEL.

■

Connect the C7 plug to the

■

Connect the voltage and the current inputs of the PEL as if the adapter were not there.

The L1 and N or L1 and L2 voltage inputs must be connected for the adapter to operate.

The adapter can operate only on 50/60Hz networks (not DC or 400Hz).

Electrical

Range of use

Max. input voltage

Min. input voltage

Max. output voltage

Frequency

Consumption

Environmental

Operation: 32 to 122°F (0 to 50°C) and 10 to 85% RH

Storage: -4 to 158°F (-20 to +70°C) and 0 to 95% RH

Indoor use; Level of pollution: 2

Altitude: < 2000m; Storage: < 10,000m

Mechanical

Dimensions (L x H x D): 3.6 x 2.6 x 1.5" (93 x 67 x 37mm)

Weight: 5 oz (150g) approx

Cord: 11" (300cm) approx

Inrush protection: IP 40 per IEC 60529

IK 04 per IEC 50102

Drop Test: 1 meter

Electromagnetic compatibility: Emissions and immunity in an industrial setting compliant with IEC 61326-1

Specifications are subject to change without notice.

This instrument contains no parts that can be replaced by personnel who have not been specially trained

and accredited. Any unauthorized repair or replacement of a part by an equivalent may impair safety.

Cleaning: Disconnect anything connected to the device. Clean it with a soft cloth moistened with soapy

water. Wipe dry completely.

Repair: For all repairs, please contact the factory or your local distributor.