How To Use; Using Your Blender - Black & Decker BL2020SC Mode D'emploi

Product may vary slightly from what is illustrated.

A
† 1. Measuring cup lid insert (Part # BL2010WG-01)
† 2. Lid (Part # BL2010WG-02)
† 3. 5-cup (42 oz.) glass blending jar (Part # BL2010WG-03)
4. Handle
† 5. Gasket (Part # BL2010WG-05)
† 6. Blade assembly (Part # BL2010WG-07)
† 7. Jar base (Part # BL2010WG-08)
8. Stability interlock system
9. Blender base
10. Control panel
Note: † indicates consumer replaceable/removable parts
4










How to Use

This product is for household use only.
GETTING STARTED
• Remove all packing material and any stickers from the product.
• Remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARe ANd CleANING section of this
manual.
• Wipe outside of appliance with a damp cloth; dry thoroughly.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on countertop or work surface.
2. Put gasket on top of blade assembly. Place blade assembly with gasket into
bottom opening of the jar with blades facing down.
3. Place jar base onto jar and rotate clockwise until it is tight
(B).
4. Turn assembled jar right side up.
5. Place lid with lid cap onto blending jar.
6. Uncoil power cord from storage area under the base.
Note: do not plug in the cord.
B
7. Place jar assembly on base, making sure it is press firmly
into place. (Jar base should not extend more than 1/
above the rim at the top of the base (C).
8. Blender is now ready for use.
C

USING YOUR BLENDER

1. Make sure appliance is off (0).
2. Place foods to be blended into jar, liquid first.
3. Place lid on jar; make sure measuring cup lid insert is in place.
4. Place the jar on the base of the blender.
5. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods, such as
ice, cheese, nuts and coffee beans, keep one hand on the lid to keep blender in place.
6. Press the high (HI) or low (lo) button; then select the speed that best suits your
desired task. To switch speeds, press the high (HI) or low (lo) button and the new
speed desired (see SPeed CHART).
7. When blending thick mixtures, such as smoothies, power drinks and milkshakes
press the pulse (P) button several times to begin the blending process. Press the
pulse (P) button for no more than 5 seconds at a time. This helps break up the ice
and distribute the ingredients.
-inch
8
5