Axis T8516 Guide D'installation page 12

AXIS T8516 PoE+ Network Switch
Power notice
The product is a power-required device, which means it does not work until it is powered. To avoid
network data loss or network downtime, consider using an UPS (Uninterrupted Power Supply).
Installing a surge suppression device may also help to protect the product from being damaged by
unregulated surge or current to the product or the power cord.
How to use the Mode/Reset button
By pressing the Mode/Reset button for a certain period of time, users can perform the following
tasks.
• Change between port status mode Link/Act/Speed and PoE.
• Reset the product to the previous configuration settings saved.
• Restore the product to the original factory default settings.
Task to be performed
Change port status
mode between
Link/Act/Speed and
PoE
Reset the product
Restore to the original
factory default
settings
Time period of
pressing Mode/Reset
button
0-2 seconds
2-7 seconds
7-12 seconds
LED
Green (lit)
Green (blink)
Green (blink)
12
Port status LED
behavior
LED status changes
according to the
selected mode.
The lights are OFF for
all LEDs
The lights are ON for
all LEDs