Samsung HW-J6000 Mode D'emploi page 10

Masquer les pouces Voir aussi pour HW-J6000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DESCRIPTIONS
If there is more than one file on the device you are playing, and you press
You can select from 6 different sound modes - STANDARD (Original
Sound), MUSIC, VOICE, SPORTS, CINEMA, and NIGHT MODE
Select the STANDARD mode if you want to enjoy the original sound.
Surr.Sound adds depth and spaciousness to the sound. Pressing the
SOUND button repeatedly cycles through the Surr.Sound settings :
ON - SURROUND SOUND, OFF - SURROUND SOUND
Press the Bluetooth POWER button on the remote to turn the Bluetooth
Press the WOOFER button. Then, use the #,$ buttons to adjust the
INSTALLING THE BATTERY IN THE REMOTE CONTROL
1. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
Press the & button to pause a file temporarily.
Press the & button again to play the selected file.
the # button, the previous file is selected.
- depending on the content you want to listen to.
POWER On function on and off.
See pages 19 and 25 for details.
Subwoofer volume from -12, -6 to +6.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '
' marks side by side as shown
in the figure above.
Power
Volume
Play / Pause
Skip Back
SOUND EFFECT
SOUND
Bluetooth POWER
WOOFER
10
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.

Publicité

Chapitres

Table des Matières
loading

Table des Matières