GARDTECH GT10007 Mode D'emploi page 3

e) Do not reach out too far. Keep your feet firmly on the
ground at all times. This will enable you retain cont-
rol over the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewell-
ery. Keep your hair, clot hing and gloves away from
the power tool. Loose clothes, jewellery or long hair
can become entangled in the moving parts.
g) If there are devices for connecting dust extraction
and collection facilities, please ensure that they are
attached and used correctly. Using such devices can
reduce dust-related hazards.
4) Power tool use and care
a) Do not expect the power tool to do more than it can.
Use the correct power tool for what you want to do.
A power tool will achieve better results and be safer
if used in the context for which it was designed.
b) Do not use the power tool if the switch cannot turn it
on and off. A power tool with a broken switch is dan-
gerous and must be repaired.
c) Disconnect the plug from the power source before
making adjustments, changing accessories, or stor-
ing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store power tools, when not in use, out of the reach
of children and do not allow people who are not fa-
miliar with the power tool or these instructions to
operate it. Power tools are potentially dangerous in
the hands of untrained users.
e) Maintain power tools. Check for misalignment or
jammed moving parts, breakages or any other fea-
ture that might affect the operation of the power tool.
If it is damaged, the power tool must be repaired.
Many accidents are caused by using poorly maint-
ained power tools.
f) Keep cutting tools sharp and clean. Properly maint-
ained cutting tools with sharp cutting edges are less
likely to jam and are easier to control.
g) Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power tool,
taking into account the working conditions and the
work which needs to be done. Using a power tool in
ways for which it was not intended can lead to pote-
ntially hazardous situations.
5) Service
Your power tool should be serviced by a qualified spe-
cialist using only standard spare parts. This will ensure
that it meets the required safety standards.
All manuals and user guides at all-guides.com
WARNING: Take care not to expose this
tool to rain and remove plug from mains
supply immediately if the supply cable is
damaged.
WARNING: DO NOT OPERATE THIS
TOOL WITH COLLECTION BAG REM-
OVED.
Serious injury from the fan or flying debris
could result.
WARNING: DO NOT OPERATE THIS
TOOL WITH VACUUM/BLOWER TUBE
REMOVED.
Serious injury from the fan or flying debris
could result.
WARNING: Electric shock could occur if
used on wet surfaces. Do not expose to rain.
Store indoors.
WARNING: Always wear eye protection to
prevent rocks or debris from being blown or
ricocheting into the eyes or face which can
result in blindness or other serious injury.
MACHINE SAFETY WARNINGS
1.Always direct the cable to the rear, away from the app-
liance.
2.If a cord becomes damaged during use, disconnect the
supply cord from the mains supply immediately.
3.Operate the appliance only in daylight or in good artif-
icial light.
4.Walk, never run.
5.Keep all cooling air inlets clear.
6.Do not attempt to modify the power tool in any way. The
use of any attachment or accessory over than those
recommended in this instruction manual could result in
damage to the power tool and injury to the operator.
7.Never feed hard objects such as stones, bottles, cans
or pieces of metal into the Vac- Blower
damage to the machine and possibly injury to the op-
erator and bystanders.
8.If a foreign body, or other debris, is accidentally feed
into the Vac-Blower, stop it immediately
the Vac-Blower until it has been checked and you are
sure that the entire Vac-Blower is in a safe operating
condition.
3
GB
NL
DE
FR
. They can cause
and do not use