Technical Specifications; Frequently Asked Questions - GOAL ZERO 1000X Mode D'emploi

Technical Specifications

General:
Dimensions
Gauge
Used with
Ports:
Input
Output
4
10 x 4.4 x 1.6 in (25.4 x 11.2 x 4 cm)
14AWG
Goal Zero Yeti 1000X/1500X/3000X/6000X
AC Wall Plug 100-240V -50/60Hz 8.0A
HPP 40.0V - 15.0A (600W max)

Frequently Asked Questions

Why am I seeing less than 600W input into my Yeti?
In order to safely and efficiently charge your battery, the actual input to your Yeti X
may vary from 500W to 600W. The input will usually be lower during the top end and
bottom end of the charging cycle.
Why is my power supply hot?
The heat is normal and can reach temperatures up to 140 Degrees Fahrenheit (60
Degrees Celsius). This is caused by the change in voltage from AC to DC voltage.
Why is my power station not charging?
Please double check all connections are firmly plugged in. The Yeti Power Stations
have built-in over charge protection. It is possible your unit is fully charged or close
to a full charge. We would recommend confirming the functionality at a lower battery
level < 80%.
5