Connecting A Mobile Device; Connecting Via Bluetooth - Samsung HW-N400 Manuel Utilisateur

07 CONNECTING A MOBILE DEVICE

Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
Bluetooth device
The initial connection
1. Press the (Source) button on the right side panel or on the remote control, and then select
"BT".
2. Change "BT" to "BT PAIRING".
• When "BT READY" appears, press the
the (Source) button on the right side panel of the Soundbar for more than 5 seconds to
display "BT PAIRING".
3. Select "[AV] Samsung Soundbar Nxxx N-Series" from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → "BT"
appears in the front display.
4. Play music files from the device, connected via Bluetooth, through the Soundbar.
NOTE
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY"
mode to reconnect. See Page 8 for details.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[AV] Samsung Soundbar Nxxx N-Series") appears
in the list, delete it.
• Press the PAIR button on the remote control or in "BT" mode, press and hold the
button for more than 5 seconds on the right side of the Soundbar to switch to "BT PAIRING" mode.
Then, select "[AV] Samsung Soundbar Nxxx N-Series" from the Bluetooth device search list.
For more information about Bluetooth connections, refer to "Connecting a TV via
Bluetooth" on pages 7~ 8.
PAIR button on the remote control or press and hold
ENG - 12
(Source)