KitchenAid Pro Line Serie Mode D'emploi page 23

6. Fill the coffee maker with coffee and fresh water, then
activate the automatic brew timer by turning the
Auto-On/Off Switch counter-clockwise to the "Auto" position,
then releasing. When the brew timer is active, the auto
indicator light will be illuminated.
NOTE: The brew timer will not activate if there are fewer than
4 cups (17 oz [500 ml]) of brew water in the reservoir.
If message tones are enabled, the coffee maker will beep on
every attempt to activate the brew timer without sufficient water
in the reservoir.
If automatic brewing needs to be cancelled, deactivate the brew
timer by turning the Auto-On/Off Switch counter-clockwise to the
"Auto" position, then releasing. When deactivated, the auto
indicator light will go out.
7. When brewing starts at the programmed time, the on/off
indicator light will illuminate and the auto indicator light will
go out.
If message tones are enabled, the coffee maker will beep
three times when brewing is complete.
NOTE: The automatic brew timer must be activated each time you
want the coffee maker to brew at the programmed time.
21