Beper P102ROB200 Manuel D'instructions page 11

Hache-viande électrique avec presse-tomates
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
EN
Electrical Meat Grinder with Tomato Juicer Use instructions
Reverse function
In case of jamming switch off the appliance.
Wait few minutes till the machine will be stop completely.
Press the REVERSE button.
Snake will be rotating in the opposite direction, and the head will get empty.
If it doesn't work, switch off the appliance (make sure the plug is disconnected) and clean the head manually.
Making kibbe Fig.C
Kibbe is a traditional dish from Middle East, they are meatballs made of lamb (also beef) and wheat.
Before starting please assembly kibbe attachments.
Insert kibbe attachment, with adapter and cone, into the head. Close with the fixing ring.
Plug the cord, press the ON button.
Put meat into the hopper plate and push with the food pusher. Do not push excessively.
Cut to the desired size.
Making sausages Fig.D
Before starting please assembly sausage attachment.
Insert sausage attachment between cutting plate and the fixing ring.
If you use the hose, immerse in cold water for 30 minutes before use. Open it with a water jet and put it on the
sausages attachment.
Connect the power cord, press ON switch button.
Put meat into the hopper plate and push with the food pusher. Do not push strongly.
Release the hose so as to remove it from the sausage attachment as it fills up. Do not fill excessively.
When finished, twist the hose to form sausages.
How to make tomato juice Fig.E
Please follow the figures on the side showing the assembly of the tomato strainer.
It is recommended to use ripe tomatoes.
Carefully wash the tomatoes, cut them into pieces and cook until they are wilted. At this point insert them into the
hopper plate and press them down using the food pusher.
Cleaning and care
How to disassembly
Make sure the motor unit is completely off.
Unplug from the socket.
Disassemble all accessories (performing the assembly steps in reverse).
To remove the cutting plate easily, place a screwdriver between the cutting plate and lift it up Fig.F.
Cleaning
Remove any eventually residue of food.
Wash accessories with warm water and liquid soap, wipe well. The dishwasher IS NOT recommended.
Clean the unit with a wet cloth and wipe well.
Do not use thinners or alcohol to not damage the appliance.
Do not immerse the appliance into water.
Apply vegetal oil frequently on the cutting plates.
Technical data
Power: rated power 500W – lock power 1200W
Power supply: 220-240V~50Hz
For any improvement reasons, Inside reserves the right to modify or improve the product without any
notice.
11

Publicité

Table des Matières
loading

Table des Matières