LIVING BASICS S102 Mode D'emploi page 7

All manuals and user guides at all-guides.com
1. Never pull or yank the cord or the
appliance.
2. Insert plug, grasp it firmly and guide it
into outlet.
3. Disconnect appliance, grasp plug and
remove it from outlet.
4. Before each use, inspect the power
cord for cuts and/or abrasion marks. If
any are found, this indicates that the
appliance should be serviced and the
line cord replaced.
5. Never wrap the cord tightly around the
appliance, as this could place undue
stress on the cord where it enters the
appliance and cause it to fray and
break.
DO NOT OPERATE APPLIANCE IF
THE POWER CORD SHOWS ANY
DAMAGE, OR IF APPLIANCE
WORKS INTERMITTENTLY OR
STOPS WORKING ENTIRELY