Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
INTRODUCTION
The HDbitT HDMI extender includes a transmitter unit (TX) and a receiver unit (RX). Applied advanced HDbitT
technology, the supported resolution is up to 4Kx2K @ 60Hz ultra HD. It supports one-to-one and one-to-
many connections, the transmission distance is up to 120 meters. With the infrared transfer function, it is very
easy to control the media playback of the signal source device at the viewing location.
FEATURES
1.- Compatible with HDMI 2.0 and HDCP2.
2.-
Extends the HDMI signal over a single CAT5/6.
3.- Long transmission distance up to 120 meters (high quality CAT6 can reach up to 150 m).
4.- Supported resolution is up to 4Kx2K@60Hz ultra HD.
5.- Infrared passback with a frequency of 20-60 KHz to easily control the source device from the receiver
side.
6.- Supports one-to-one and one-to-many configuration.
7.- Interconnect with another HDbitT VGA/SDI/DVI transmitter via
INSTALLATION REQUIREMENTS
1.-
HDMI source device (computer graphics card, DVD, PS3, HD monitoring equipment,
2.-
HDMI display device such as SDTV, HDTV, projector with HDMI
3.-
Network Cables: UTP/STP Cat5e/6 network cables, which conform to IEEE-568B standard.
Transmission length: CATS 80m/CAT5E 100m/CAT6 120m.
CONTROLS AND FUNCTIONS
HDMI EXTENDER TX
1.- HDMI signal input: connect to the source device.
2.- IR signal output: connect with IR blaster extension cable.
3.- Reset button: press to restart the unit.
4.- Power indicator: indicator lights up when turned on.
5.- Power input: connect with DC5V/3A power adapter.
6.- Data transmission indicator: flashes when data is transmitted.
7.- Connection indicator: The LED lights up when the transmitter is connected to the receiver; otherwise,
it is off .
8.- HDbitT signal output: HDMI signal output.
CAT5/6.
port.
- 2 -
etc.).
Publicité
Table des Matières
