FGA Little Moppet Instructions D'assemblage

NOTE: THE LITTLE MOPPET™ WHEELBARROW IS INTENDED FOR PLAY ONLY; NOT TO CARRY LOADS OVER 4LBS.
DO NOT ALLOW CHILDREN TO SIT OR STAND IN THE WHEELBARROW.
• Do not discard any of the packaging until you ensure you have all parts and fittings listed. • Assemble by a responsible
adult. • Only use the tools specified. • Assemble all parts loosely before tightening the bolts. • Wash using warm soapy
water. • Lubricate the wheel with a light lubricating oil when necessary. • Do not use abrasive cleaners.
Safety Warning
Not to be used by children under 4 years of age. CHOKING HAZARD: This product contains small pieces. Inspect the
wheelbarrow regularly for sharp edges.
CONTENTS
Tray x 1
Wheelbarrow Assembly
• Using a Philips screwdriver (not included), attach one handle
to the tray using Screw B. Ensure the screw is fed through the
top of the tray then twist the nut on the other side to secure.
Repeat for the other handle. (See figure 1).
• With the screwdriver, attach one leg to the tray using Screw
A. Ensure the screw is fed through the top of the tray, the
handle and then the leg. Twist the nut on the other side to
secure. Repeat for the other leg. (See figure 2).
• Insert Screw C through the top of the tray and the leg. Twist
the nut on the other side to secure. Repeat for the other leg.
(See figure 3).
• Position the wheel into the gap between the wheelbarrow
legs and secure with the wheel bolt. Tighten all fittings using
an adjustable wrench (not included) to ensure that all parts are
secure.
Family Games America FGA Inc.
P.O. Box 97, Snowdon, Montreal, Qc, Canada H3X 3T3
www.familygamesamerica.com
Little Moppet™
Retain for future use.
Legs x 2
Handles x 2
Assembly Instructions
A
B
C
Wheel x 1
2
A
C
C A
MADE IN CHINA
4
12mm Nut & Bolt x 2
16mm Nut & Bolt x 2
20mm Nut & Bolt x 2
Wheel Bolt x 1
1
B
3
B
+