Video Out - JVC AV-P1000U Manuel D'instructions

PC
● Use this button to output the PC signal (input from the PC IN
connector) to the RGB OUT connectors. The indicator lights.
● Press the button again to restore camera picture output. The
indicator goes out.
Note :
Depending on the projector or display, the picture may
be distorted or it may take some time before the picture
appears after the signal is switched with this button.

VIDEO OUT

● Press this button to output composite signals from the cam-
era to the VIDEO OUT connector. The indicator lights.
● Press again to output signals to the RGB OUT connectors.
The indicator goes out.
● Signals received via the PC IN connector cannot
Notes:
be output to the VIDEO OUT connector.
● Thin lines in the camera picture may flicker on the
monitor screen when the camera signal is output
via the VIDEO OUT connector.
● When digital zoom is activated, signals cannot be
output to the VIDEO OUT connector.
● During video output, the [FREEZE] button will not
operate.
● During video output, the [PICTURE MEMORY 1
to 3] buttons will not operate.
* Camera signals can be output from the VIDEO OUT con-
nector at the same time as signals from the PC IN connec-
tor are output from the RGB OUT connectors.
12
ON-SCREEN ADJUSTMENTS
LIGHTS IRIS MENU/ENTER
NEAR
VIDEO PC FREEZE AUTO WHITE
SET
OUT
ON-SCREEN ADJUSTMENTS
LIGHTS IRIS MENU/ENTER
VIDEO PC FREEZE AUTO WHITE NEAR
SET
OUT
FOCUS ZOOM
1 PRESET 2
TELE WIDE
FAR
DIGITAL
FOCUS ZOOM
1 PRESET 2
TELE WIDE
FAR DIGITAL