cecotec BAMBA SURFCARE 850 MAGIC WAVES VISION Mode D'emploi page 27

The curling heater tube will then heat up quickly. Do not leave the
product unsupervised while it is switched on.
If the curling iron stops due to a jam, "Err2" will appear on the LCD
screen. To re-use the device, unplug it and plug it in again. Select
the temperature between 130 and 230ºC on the screen with the
rotary knob based on the thickness of your hair. It is suggested
to use 130ºC, 150ºC for dyed or damaged hair; 170ºC or 190ºC for
thin hair; 210ºC for normal hair; and 230ºC for thick or very thick
hair. Once the temperature has been selected, wait a few seconds
until it reaches the selected temperature and it stops flickering.
Press the time button and turn the selector to adjust the curling
time. You can choose from 3 to 12 seconds. It is recommended
to select the time depending on the hair thickness: choosing
3 seconds for damaged hairs or at very high temperatures,
and 12 seconds for thick and hard to mould hairs, and also low
temperatures.
Press the button again to confirm the time or wait a few seconds
until the clock symbol on the display is fixed.
Press the time button and a clock symbol will appear on the
LCD display. Rotate the knob to adjust the temperature, a
thermometer symbol will appear on the LCD display.
Press the rotation button to the right when curlying the right side
of your hair, and viceversa.
Make sure your hair is clean and totally dry before using the
device.
Brush and comb your hair before using the curling iron.
BAMBA SURFACE 850 MAGIC WAVES VISION
ENGLISH
27