Tips And Tricks - Midland XTC-100 Manuel

Tips and Tricks

Problem
Batteries
Ensure the batteries are installed
properly observing polarity.
Camera not turning on
Make sure batteries are new or fully
charged.
Recording
Make sure the switch is pushed all the
way forward. If the record LED does
not come on, turn off the device and
Camera not recording
reinstall the batteries.
Verify available memory.
Micro SD card
Ensure the Micro SD card is inserted
properly.
Micro SD card not reading Plug camera into the computer to verify
it has available storage.
Attempt formatting process.
Video Playback
Verify the camera is plugged into a USB
2.0 device.
Remove other unused USB devices.
Slow or choppy video
Transfer video to computer before
viewing.
Close all unused programs.
6
Solution
www.midxtc.com
Tips and Tricks
Problem
Video Downloading
Verify the camera is plugged into a USB
2.0 device. If registering as 1.1, unplug
and the re-plug the device.
Slow data transfer
Remove other unused USB devices.
Ensure record switch is in the record
position while connected to computer.
Computer does not Ensure the Micro SD card is inserted
recognize camera properly.
Micro SD card may be corrupted. Attempt
formatting process.
In the run command type:
File won't transfer off
chkdsk volume:/f
memory card
then press enter
Sound
Excessive Wind Noise Place piece of tape over microphone hole.
Solution