Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Motor
110 V~, 60 Hz, 620 W, n
Capacity
1"
Chuck Type
SDS
Rotation
Reversible
Cord
7' UL Listed with 2-Pole Polarized Plug
BPM
2920
Weight
10.5 lb.
Also Includes
Spanner, (4) SDS Drill Bits (10,12,14 and 22 mm), 4 Point
Chisel, Depth Gauge Rod, Grease, and Carbon Brush Set
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Write the
product's serial number in the back of the manual near the assembly diagram, or write month and
year of purchase if product has no number. Keep this manual and invoice in a safe and dry place
for future reference.
failure to follow all instructions listed below may result in
1.
keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
2.
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust
or fumes.
keep bystanders, children, and visitors away while operating a power tool. Distractions
3.
can cause you to lose control. Protect others in the work area from debris such as chips
and sparks. Provide barriers or shields as needed.
for technical questions, please call 1-800-444-3353.
SKU 41983
SpEcificATiOnS
750/min
0
Save This Manual
gEnERAl SAfETY RulES
READ AnD unDERSTAnD All inSTRucTiOnS
electric shock, fire, and/or serious injury.
SAVE THESE inSTRucTiOnS
wORk AREA
wARning!
E194601
E194601
Page 2
Publicité
Table des Matières
