Operating And Safety Instructions - Unitec 77 108 Mode D'emploi

All manuals and user guides at all-guides.com
Instructions
on use
Safety
instructions
Supplied
HD car camera
Installation
instruction
Setup
Switching the device
on/off
Attention
Charging batteries
Inserting
a Micro SD card
Removing
a Micro SD card
77108_BDA_120x170_131209.indd 6


Operating and safety instructions

Please read the operating instructions through carefully before using
the car camera. They contain all the important information that you
need to familiarise yourself with its functions.
Retain the instructions during the product's working life in case of any
questions and pass the operating instructions on to any other user or
subsequent owner.
Road safety has priority at all times. The driver must not allow himself to
be distracted by the camera or its operation whilst in traffic!
1. Suction cup attachment
2. 12 V motor vehicle charging cable
Digital video camera
Digital recording device
Digital photo camera
The camera is to be attached in such a way that the driver's field of
view is not adversely affected.
Press the  button once to switch
the device on. The blue indicator
light will come on. Press  again
to switch the device off. The blue
indicator light will go out.
The "Low battery charge status" message is displayed before the
device switches off.
There are two ways to charge the
HD car camera battery. The red indicator
is on while the battery is being charged.
The red indicator will go out as soon as
the device is fully charged.
1. Charge via USB
2. Charge with 12 V cable in the car
Put the Micro SD card in the
memory card slot (see diagram).
Push the card in until you hear
a click.
Press the card once. Remove the card as soon as it pops out.
3. USB charging cable
4. Operating instructions
ON/OFF indicator light (blue)
ON/OFF button
09.12.13 10:57
1
2