Battery Level Indicator - Belkin AC Anywhere F5C412eb140W Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

The Power Source:

When the engine is off, most batteries will provide an ample power supply

to the Inverter for one to two hours. The actual length of time is a function

of several variables including the age and condition of the battery, and the

power demand being placed on it by the equipment being operated.

If you are using the Inverter while the engine is off, we recommend you

start the engine every hour and let it run for approximately 10 minutes to

recharge the battery. We also recommend that the device plugged into the

Inverter be turned off before turning over the engine.

Although it is not necessary to unplug the Inverter when starting the

engine, the Inverter may momentarily cease operation as the battery voltage

decreases. When the Inverter is not supplying power, it draws very low

amperage from the battery (< 0.1 amps to < 0.2 amps depending on the

model) and may be left connected to the battery for up to 3 hours. However,

we recommend the Inverter always be disconnected when not in use.

Note:

• Inverters will not operate with certain automotive systems unless the

Automatic Shut-down and Related Safety Features:

The Belkin 140 and 300-Watt Inverter models have a unique LED indicator

warning light system that operates in conjunction with the automatic shut

down feature. This indicator light operates as follows:

Your Inverter will shut down automatically when any of the following

problems occur:

1. The power input from the battery drops below 10.4 volts.

2. The power output from the battery exceeds 15 volts.

3. The continuous draw of the device exceeds the design