Periodic Maintenance - FilterQueen MAJESTIC Instructions

All manuals and user guides at all-guides.com

Periodic Maintenance

A.
A. Power Nozzle:
There are no user serviceable parts within the Majestic
issue arise that requires service, please contact your local FILTERQUEEN
service.
Note that your Power Nozzle roller brush must be replaced periodically in order to
maintain maximum cleaning performance. Contact your local FILTERQUEEN
Distributor for service.
Hose Handle / Wand / Power Nozzle:
Occasionally disassemble the wand from both the hose handle and the Power Nozzle
and wipe with a clean cloth the male connections located on both the wand and Power
Nozzle, and the female connections located on both the wand and hose handle.
Power Nozzle Resettable Circuit Breaker:
The circuit breaker is designed to protect the motor of the Power Nozzle from dam-
age, should it become clogged or the revolving brush stalls. To reset the circuit break-
er, turn off the Majestic
from Power Nozzle and press the red button on the back of the nozzle. Plug Majestic
in and resume use.
B. Power Unit Caution Light:
When lit, the caution light indicates that the motor of the power unit has overheated.
The motor automatically shuts off to prevent damage. Turn Majestic
cord from wall. Let unit cool. This condition is usually caused by an obstructed air flow.
Check for blockages in the hose, wand, or attachments. Filters may also need to be
replaced. If the problem persists take the Majestic
A.
® and unplug cord from wall outlet. Remove any foreign objects
9
B.
® Power Nozzle. Should any
® Distributor for
® off and unplug
® to an Authorized Service Center.
®
®