Citizen MV15C Mode D'emploi page 8

Connecting LCD TV to Other A/V Equipment
① ② ③
Connection steps:
1) DC IN: Connect to DC outlet
2) VGA: To use this TV as a computer monitor, connect your
VGA output here
3) S-Video: For S-Video connection
4) A/V IN: For composite Video (yellow) connection
5) and (6) A/V LN and A/V RN: RCA Audio input to connect
to other A/V equipment sound.
7) PC IN: connect to your PC sound card for computer audio
8) TV: RF input
Note:
-Make all connections before turning unit power on.
-Press the INPUT button to select the corresponding connection input.
(see page 7)
All manuals and user guides at all-guides.com
④ ⑤ ⑥ ⑦ ⑧
6
Basic Operations of LCD-TV
A- Turn on the LCD-TV
1. When the LCD TV is on stand by, light indicator is
Orange
2. Press the power button to turn on the LCD TV
a. When TV is receiving signal, light indicator
b. When TV is on, but no signal, light indicator
B- Switch the Video Input
Press the INPUT button to scroll through the video
input; CATV>RGB>CBVS>S-Video
•
CATV is for cable connection (RF)
•
RGB is for VGA connection (PC)
•
CVBS is for A/V connection
•
S-Video is for S-Video connection (with RCA
Audio jack for sound)
C- Volume Control
1) Press key VOL to turn up the volume, and there is a bar with numbers on the
screen indicating the loudness.
2) Press key VOL to turn down the volume and also there is a bar
with numbers on the screen indicating the loudness.
D- Mute
1) Press key Mute to turn off the sound temporarily and a sign will
appear on the screen
2) Press key Mute again, the mute status will be cancelled and the sign will disappear
Note:
When you press key POWER, the mute status will be canceled automatically.
is Green
is Red
CATV
CVBS
S-VIDEO
RGB
7