Identify The Model Of Tractor - Rover OEM-190-180A Manuel De L'opérateur

Model Plate
Figure 1-1
Sample Model Number
7 9 0
1 3 A M G 0 0 0
Indicates Model Series 700
Figure 1-2

Identify The Model of Tractor

This manual is designed for installation of this new bagging unit
on several different models of tractors. It is important for you
to determine which model of tractor that you have. Once this is
known, follow the pertinent set of instructions on the following
pages.
Note: Read and observe all WARNING, NOTES and IMPORTANT
statements. They are included to provide for the protection of
the equipment installer and user, and to ensure the prolonged
service life of the equipment.
Note: References to LEFT and RIGHT indicate the left and
right sides of the tractor when facing forward in the operator's
position. Reference to the FRONT indicates the grille end; to the
REAR, the rear end of the rider.
To determine which model of rider you have, you will need to
locate the rider's model plate, located under the seat. Simply flip
the seat up and locate the model plate, which will consist of an
11 digit/letter model number and a serial number. See Fig. 1-1.
For ease in this installation and for future use, copy your rider's
model number & serial number below now:
Rider Model Number:__ __ __ __ __ __ __ __ __ __ __
Rider Serial Number:_________________________
The 5th, 6th & 7th numbers from the left in your model number
determine your rider's model series. See Fig. 1-2.
When you fill in your model number in the space above, the
actual model series number should fall into the gray shaded area.
Now that you have determined what model rider you are
attaching this grass bag collection system to, follow the
instructions on the following pages according to your model of
rider.
s 1 — t t O
ectiOn O he wner
3