Led Behavior - Tait TP8000 Guide

LED behavior

If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:
briefly
steady
steady
steady
or
flashing
all off
If the charger does not behave as expected:
Make sure the radio or battery is sitting properly in the charger.
■
For the vehicle charger, see also
vehicle charger"
Check that the charger is properly plugged into the originally
■
supplied power supply.
Check that the battery and charger contacts are clean. To clean,
■
wipe the contacts with a dry lint-free cloth to remove any dirt, oil
or grease.
Meaning
The charger has been connected to a power supply.
The battery is charging.
Charging complete. Remove the battery, or leave it in the
charger.
The battery temperature is outside the normal
■
charging range. Charging will start or resume once
the temperature is within normal limits. No action is
required by you.
There is a fault. Contact your dealer.
■
If the LEDs for all charger slots continuously flash
orange, or red then orange, the charger itself may be
faulty (e.g. the 6-way charger fan may be jammed).
Contact your dealer.
There is a fault. Contact your dealer.
.
"Inserting the radio into the
Battery Charging Guide 11