Aux In Mode; Fm Radio Mode - QFX BT-600 Manuel Du Produit

Note: Once connected, sound can be controlled using either the speaker or the
relevant controls on the Bluetooth compatible device.
2. USB/ TF card Mode
1 To use TF mode, insert a TF card (not included) into the TF card slot on the back of
the speaker. The speaker will automatically change to TF mode.
2 To use USB mode, insert a compatible USB drive into the USB port on the back of
speaker. The speaker will automatically change to USB mode.
3 To add or minus the volume by pressing the"+" button and "-"button without
moving your finger away.
4 To switch the next song by pressing the button "+ "and last song by the
" - " button shortly.
Note: If the speaker does not automatically change to TF or USB mode, press "M"
until the desired operation is selected.
3 . Hand free Mode
1 To make sure your mobile phone and the speaker is connected.
"to answer the call.
2 When there is calls get in, please press"
3 When you want to hand up the phone, press "
" again.

4. Aux in Mode

Connect one end of the line in Aux port on the speaker and the other end to a MP3
player or other compatible audio source.
The speaker will automatically switch to Aux mode once the aux cable has been
inserted.
To change different functions, press the button"M".

5. FM radio Mode

Connect the micro 5 pin end of the supplied USB charging cable to unit and the
" into FM radio
cable will work as external antenna. Press the button "
function.
To scan the FM frequency, press "
button.
"
Note: Remove the USB/TF card while using the FM radio function.
6. To charge