Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAKING TEMPERATURE ADJUSTMENTS
After running your refrigerator for 24 hours, you can adjust temperatures as needed. Make your adjustments small and
gradual, allowing time for temperatures to change and stabilize. Refer to the following guidelines for temperature settings.
Temperature Adjustment Guide
Temperature Display
Warmest
Factory Setting
Coldest
SYSTEM-MONITORING ALARMS
The electronic control system continuously monitors your
refrigerator/freezer for temperature consistency and doors
left ajar. Variances from normal operating conditions are
communicated by audible tones and a set of two status
indicator lights.
RESPONDING TO ALARMS (AUDIBLE TONES &
INDICATOR LIGHTS)
Your refrigerator's control system can convey the following
information through audible tones and the alarm indicator
lights.
Door
Flashing
Ajar
Green
All manuals and user guides at all-guides.com
Temperature Controls
If Fresh Food compartment is too warm
If Fresh Food compartment is too cold
If Freezer compartment is too warm
If Freezer compartment is too cold
Freezer
Fresh Food
F°
C°
F°
C°
6°
-14°
47°
8°
0°
-18°
37°
3°
-6°
-21°
33°
1°
Freezer or Fresh Food
door has been open for
over five minutes.
Adjust Fresh Food control one degree
colder by pressing Down (Colder) button.
Adjust Fresh Food control one degree
warmer by pressing the Up (Cold) button.
Adjust Freezer control one degree colder
by pressing Down (Colder) button.
Adjust Freezer control one degree warmer
by pressing the Up (Cold) button.
WHAT TO DO IF THE TEMPERATURE DISPLAYS
FLASH
If either display is continuously flashing, it may indicate that
the control system has detected a performance problem.
Call your Sears service representative, who can interpret
the flashing message.
Close door to silence and reset alarm.
10
Publicité
Chapitres
Table des Matières
