Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Start up / Stop Double Booster
Action
Switch on cooking zone
Start up the Booster
Start up Double Booster
Stop the Double Booster
Stop Booster
Power management:
The hole cooking hob is equipped with a maximum of Power. When the Power function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 999 minutes) for each heating zone.
Setting and modification of the cooking time:
Action
Switch on cooking zone
Select the power level
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
Control panel
Press cooking zone "On/Off" key
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Re-press key [ P ]
Slide on the "SLIDER"
Slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
Control panel
Press cooking zone "On/Off" key
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
13
Display
[ ON ]
[ P ]
[
and P ]
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
(example: Booster level 9)
Display
[ ON ]
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]

Publicité

Chapitres

Table des Matières
loading

Table des Matières