US Robotics 56K Guide D'installation Rapide page 10

All manuals and user guides at all-guides.com
English
Windows 98SE
1. When the Add New Hardware Wizard detects the modem, insert the Installa-
tion CD-ROM into your CD-ROM drive and click Next.
2. Select Search for the best driver for your device (Recommended) and
click Next.
3. Select CD-ROM drive and click Next.
Windows installs the U.S. Robotics 56K FAX EXT driver.
4. Click Next, then click Finish to complete the installation.
Windows NT
1. Before you log on, insert the USRobotics Installation CD-ROM into your
CD-ROM drive.
2. Click Windows Start > Settings > Control Panel.
3. Double-click Modems.
The Modems Properties Window appears.
4. Click Add.
5. When the Install New Modem window appears, click Next.
6. When Windows detects the Standard Modem driver, click Change.
7. Click Have Disk.
8. Type and click OK, where D is the drive letter assigned to your CD-
D:\
ROM drive.
9. Select U.S. Robotics 56K FAX EXT (non-PnP) and click OK.
10. Click Next.
11. Click Finish to complete the installation.
When the Modems Properties window appears, you will see the COM port
that is assigned to your modem.
12. Click Close.
13. If the System Settings Change window appears, click Yes to restart your com-
puter.
Windows 95 OSR2
1. When the Update Device Driver Wizard detects the modem, insert the
Installation CD-ROM into your CD-ROM drive and click Next.
2. When prompted, click Finish to complete the installation.
Congratulations. You have successfully completed the installation proce-
dure. Please register your 56K Serial Controller Faxmodem at
.
ductreg/
8
www.usr.com/pro-