Winter Application; General Maintenance - AquaScape Pro Air 60 Pond Aeration Kit Manuel D'instructions Et Maintenance

STEP 7
SECURE TUBING TO DIFFUSERS
• Use the stainless steel hose clamps to secure the tubing
onto each diffuser.
STEP 8
SET DIFFUSERS IN POND
• Set the diffusers in the pond.

Winter Application

• The aeration kit can be used during winter months where bubbles and water movement
created at the surface help to maintain a small opening in the ice for oxygenation. DO NOT
place the diffusers on the bottom of the pond during winter, as it may disrupt the natural
thermocline found in the deeper portions of the pond where the fish are overwintering. Place
the diffuser about 1 to 1.5 feet below the surface of the water.

General Maintenance

• The inlet sponge filter should be checked annually or if the compressor makes any abnormal
noises. If operating the unit in dusty conditions, you will need to check it more frequently. The
filter is easily inspected by gently popping off the top plastic compressor cover. The sponge
filter and lid can be rinsed in clean water and thoroughly dried before replacing.
• The compressor components can be completely replaced, as needed, to maximize
functionality. Use the Pro Air 60 Air Inlet Sponge Filters and Pro Air 60 Replacement
Diaphragm to refresh the compressor.
• Winter care: the Pro Air 60 can be operated through freezing winters. If not running the
compressor through the winter, it is recommended to cover the compressor or store it in a frost-free location.
☎
aquascapeinc.com | CAN (866) 766-3426 |
STEP 9
PLUG IN COMPRESSOR
• Plug the compressor
into a ground fault circuit
interrupter (GFCI) rated
receptacle and enjoy the
benefits!
☎
US (866) 877-6637
5