Samsung SEK-1000 Mode D'emploi page 7

Smart Touch Control
Inserting the Batteries (AAA X 2)
1
1. Slightly lift the battery cover by pulling the strap or by inserting a plastic card (e.g. a credit card) into the notch on the side
of the control and twisting. Once the cover is loose, hold the body of the control firmly with one hand and pull up on the
cover with the other.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
Align the battery cover with the back of the remote control, and then press down along the edges until it is completely
3.
attached to the remote control.
2
or
English-7
3