Manual Store - Samsung 6 Serie Mode D'emploi

Manual Store

❑
Scans for a channel manually and stores it in the TV's memory.
Digital Channel (Digital)
„
Digital Channel is only available in DTV mode.
N
• Channel : Set the Channel number using the ▲, ▼ or number (0~9) buttons.
Frequency
• : Set the frequency using the number (0~9) buttons.
• Bandwidth : Set the bandwidth using the ▲ or ▼ buttons.
When it has finished, channels are updated in the channel list.
N
Analogue Channel
„
Manual store for analogue channel.
• Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
• Colour System → Auto / PAL / SECAM / NTSC 4.43
• Sound System → BG / DK / I / L : Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
•
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
If there is abnormal sound or no sound, reselect the sound standard required.
N
• Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
• Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Channel mode
N
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Satellite
„
• Satellite : Selects the satellite using the up/down buttons.
• Index : Selects the transponder using the up/down buttons.
• Scan Mode : Selects either free or all channels to store.
• Frequency : Sets the frequency using the numeric buttons.
• Symbol Rate : Sets the symbol rate using the numeric or up/down buttons.
• Polarity : Sets the Polarity using the up/down buttons.
• Network Search : Enable/Disable network search using the up/down buttons.
Signal Quality
• : Display the current status of broadcasting signal.
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
N
Cable Search Option
❑
You can set additional search options such as frequency and symbol rate for cable network searching. (Depending on the each
country)
• Freq.Start : Displays the frequency start values.
• Freq.Stop : Displays the frequency stop values.
• Modulation : Displays available modulation values.
• Symbol Rate : Displays available symbol rates.
If the Freq.Start value is bigger than Freq.Stop value, the warning message is displayed.
N
: Sets the colour system value using the ▲ or ▼ button.
English - 13
Continued...