Troubleshooting - Klarstein BUBBLE BOOST Manuel

TROUBLESHOOTING

Problem
The washing machine is
not running.
The washing machine is
not running.
When washing, the
machine turns off
unexpectedly.
The water drains poorly or
not at all.
Possible cause
Power failure.
Poor electrical connection
in the socket or blown
fuse.
The timer knob has not
been turned.
The triangular strap has
loosened during transport
.
The triangular strap has
loosened during transport
.
Current voltage too low.
The seal is leaking.
The drain is not deep
enough.
The drain hose is kinked.
Solution approach
Check if there was a
power failure.
Check the socket and the
fuse.
Turn the timer knob on
the top of the washing
machine to select the
desired washing time.
Open the rear cover,
loosen the fastening
screw of the motor base
and move the motor
backwards until the
triangular strap is firmly
in place
Attach the triangular strap
Ensure that you only
connect the appliance
to sockets with the
appropriate voltage.
Contact a specialist
company for repairs.
Position the drain hose to
allow the water to drain
off easily.
Remove the kink.
EN
23