Télécharger Imprimer la page

Publicité

Liens rapides

Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
CUSTOMER SERVICE: 732-366-1788
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Please read the instructions thoroughly.
2. Identify all parts and hardwares.
3. You will need the following tools:
Philips head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Notez s'il vous plaît que l'avertissement sur la table à langer
est exigé par la loi de la CPSC et l'ASTM, qui nous oblige d'in-
former les parents et les personnes en charge des enfants.
Nous nous excusons pour toute inconvenance que cela pour-
rait vous causer.
L'assemblage par un adulte de ce meuble est nécessaire.
Les petites pièces non-assemblées présentent le risque d'étouffement.
Pour vous aider pendant l'assemblage de votre produit, veuillez trouver
en bas des instructions simples, en étape. Avant de commencer
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE.
NUMÉRO DU MODÈLE : 639
1
ITEM NO: 639

Publicité

loading

Sommaire des Matières pour DOM FAMILY 639

  • Page 1 INSTRUCTIONS D'ASSEMBLAGE. PISCATAWAY TWP NJ 08854 ITEM NO: 639 CUSTOMER SERVICE: 732-366-1788 NUMÉRO DU MODÈLE : 639 Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products. Before you begin we recommend that you following the steps below: 1.
  • Page 2 l'assemblage, les étapes suivantes sont vivement recommandées : 1. Lisez attentivement les instructions. 2. Identifiez toutes les pièces et les outils. 3. Vous avez besoin des outils suivants : Tournevis cruciforme Tournevis plat Marteau N'utilisez pas d'outils électriques. Pour protéger les pièces pendant l'assemblage, placez-les sur une surface souple.
  • Page 3 WARNING ! · FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. · READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. · UPON COMPLETION OF ASSEMBLY, MAKE SURE ALL SCREWS,BOLTS AND FASTENERS HAVE BEEN SECURELY TIGHTENED.
  • Page 4: Fabriqué En Chine

    MISE EN GARDE ! LE NON-RESPECT DES AVERTISSEMENTS ET DES INSTRUCTIONS D'ASSEMBLAGE PEUT CON- DUIRE À DES BLESSURES GRAVES OU À LA MORT. LISEZ TOUTES LES INSTRUCTIONS AVANT L'ASSEMBLAGE DU LIT. GARDEZ LE MANUEL POUR UNE UTILISATION FUTURE. APRÈS AVOIR FINI L'ASSEMBLAGE DU LIT DE BÉBÉ, VÉRIFIEZ QUE TOUS LES ÉCROUS, LES BOULONS ET LES VIS SONT FERMEMENT SERRÉS.
  • Page 5 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. (A1):Left Headboard leg (1pc) (B1):Left Footboard leg (1pc) (A2):Right Headboard leg (1pc) (B2):Right Footboard leg (1pc) (A3):Headboard Top Rail (1pc) (B3):Footboard Top Rail (1pc) (A4):Headboard Bottom Rail (1pc) (B4):Footboard Bottom Rail (1pc) (A) Headboard panel 1PC (B) Footboard panel 1PC C.
  • Page 6 PARTS: HARDWARE KIT IS PART #21598 FOR COLOR 209 OR #23486 FOR COLOR 607. SEE FRONT COVER. No drills necessary. Do not use power screwdriver a .3” Allen head bolt(12pcs) Phillips Screwdriver (not supplied) b.2-1/8’’Allen head bolt(16pcs) f. 1-1/4”Wood dowels (8pcs) c.1-3/8”Allen head bolt(8pcs) i .
  • Page 7 SECTION 1: Crib Assembly STEP 1 Parts and tools required to complete step. c.1-3/8”Allen head bolt(8pcs) f. 1-5/8”Wood dowels (8pcs) (A1):Left Headboard leg (1pc) (B1):Left Footboard leg (1pc) (A2):Right Headboard leg (1pc) (B2):Right Footboard leg (1pc) (A3):Headboard Top Rail (1pc) (B3):Footboard Top Rail (1pc) (A4):Headboard Bottom Rail (1pc) (B4):Footboard Bottom Rail (1pc)
  • Page 8 SECTION 1: Crib Assembly STEP 2 Parts and tools required to complete step. D. Left bed rail (1 pc) From step 1 g. Allen wrench (1pc) d.Barrel nuts (3pcs) a . 3 ” Allen head bolt(3pcs) Using the bolt (a) and the barrel nut (d) to connect the front left bed rail (C) to right board(B) .
  • Page 9 SECTION 1: Crib Assembly STEP 3 Parts and tools required to complete step. H. Cross Bar (3PCS) G .Cross Bar (1 PC) From setp 2 b.2-3/8’’Allen head bolt(2pcs) d.Barrel nuts (2pcs) g. Allen Wrench 1 PC Note: please make sure the face in color of part G is assembled outside, the other face in nature is inside.
  • Page 10 SECTION 1: Crib Assembly STEP 4 Parts and tools required to complete step. d.Barrel nuts (5pcs) C. Right bed rail (1pcs) From step 3 g. Allen Wrench 1 PC a .3 ” Allen head bolt(3pcs) b.2-3/8’’Allen head bolt(2pcs) Repeat the step 1 - step 4 to assemble the footboard, by using the parts for the footboard in the parts list.
  • Page 11 SECTION 1: Crib Assembly STEP 5 Parts and tools required to complete step. E.Middle bar (2pcs) F .Cross Middle Bar (2 pcs) g. Allen Wrench 1 PC d.Barrel nuts (8pcs) b.2-3/8’’Allen head bolt(8pcs)
  • Page 12 SECTION 1: Crib Assembly STEP 6 Parts and tools required to complete step. From step 5 Footboard Headboard M4 ALLEN WRENCH From step 4 SUPPLIED i. Wood dowels (4pcs) Allen head bolt(4pcs) e. Crescent Washer x 4 h. 1-4/5 ”...
  • Page 13 SECTION 2: Chair and Table Assembly STEP 1 Parts and tools required to complete step. Legs(4pcs) Table top(1pc) Not supplied Not supplied g. Allen wrench (1pc)
  • Page 14 SECTION 2: Chair and Table Assembly STEP 2 LIMITED WARRANTY workmanship and agrees to remedy any such defect. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included. assembled, subjected to misuse or abuse or which has been altered or repaired in any way.