NOSTALGIA PRODUCTS CIT3PLSAQ Manuel D'instruction page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Light will illuminate, letting you know the power is on.
IMPORTANT: When pressed, the Power Button only starts the brewing process, but DOES
NOT function as an "OFF" button. To turn the unit off mid brew cycle, simply unplug the
appliance.
NOTE: Uplugging the appliance WILL NOT immediately empty water
from the Flavor Extraction Chamber. Allow several minutes for the water
to flow into the Pitcher before removing from the Drip Tray.
10. Once the brew cycle starts, the appliance will automatically brew all the water from the
Water Reservoir before turning off.
IMPORTANT: DO NOT attempt to press the Power Button to interrupt or stop
the brewing cycle. The Power Button does not function as an "OFF" button.
Repeatedly pressing the Power Button could damage the appliance.
11. When the brewing cycle is complete, remove the pitcher from the Drip Tray.
Place the Pitcher Lid on the Pitcher to serve or to store beverage for later.
12. After the appliance has cooled, open the Top Cover and remove the Filter Basket
and Flavor Extraction Chamber. Discard the used coffee, tea leaves or tea bags.
Thoroughly rinse the Filter Basket and Flavor Extraction Chamber in warm water.
7

Publicité

Table des Matières
loading

Table des Matières