Worx HYDROSHOT WG629 Mode D'emploi page 14

ATTACHMENT OF
ACCESSORIES
A number of accessories have been supplied with
this product and are required for use in different
applications. Do not attempt to use the cleaner
with no lance or accessories attached.
1. Soap bottle (WG629.1 only)
Soap bottle provides detergent suds for deeper
cleaning of dirt. It is used in conjunction with power
nozzle or extension lance (WA4012). (See Fig. M1,
M2)
2. Brush (WG629.1 only)
Brush is for cleaning cars, boats, motorcycles
etc. It is used in conjunction with power nozzle or
extension lance (WA4012). (See Fig. N1, N2)
3. Window squeegee with water sprayer
(WG629.1 only)
The window squeegees quick connection easily
snaps into the tool to spray water or wipe off
water from glass or tiled surfaces. Suitable for the
HYDROSHOT power cleaner or extension lance
TM
(WA4012). (See Fig. O1, O2, O3, O4)
4. Bottle cap connector (WG629.1 WG629.2)
The bottle cap connector accessory allows the tool
to directly connect with most 2 Liter bottles with
approximately 1" openings. (NOTE: May not fit all
14
consumable soda and water bottles) (See Fig. P1,
P2, P3)
WARNING: Do not install the bottle cap
connector accessory until it is ready to be
used. The accessories vents will leak liquid, if
a bottle is installed, with the machine lying on
a surface.
5. Turbo nozzle (WA4037, sold separately)
The turbo nozzle delivers 360° of rotating water,
which cleans a larger area than the 0° water
pattern during the same time period. Suitable
with the pressure cleaning lance installed on the
HYDROSHOT . Recommend to use it with high
TM
pressure setting. (See Fig. Q)
Cordless Portable Power Cleaner
MAINTENANCE
Remove the Battery Pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Inspect the product for damaged or worn parts
before each use. Do not operate it if you find
damaged or worn parts. Contact your supplier or the
manufacturer for replacement parts.
Hose filter maintenance
Remove the hose filter from the hose and get out
the strainer. Rinse the parts with clean water before
reassembling. (See Fig. R1, R2)
Filter screen maintenance
Remove the hose adapter to get the filter screen.
(See Fig. S1, S2) Rinse it with clean water before
reassembling.
NOTE: When retightening the hose adapter, please
tighten securely. Otherwise, it may not draw any
water for proper operation.
WARNING: Any other servicing should be
performed by an authorized service
representative.
CLEANING/STORAGE
Before storage, completely drain all the water from
the machine and hose.
Clean the moulded plastic housing of the machine
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Store in a secure and dry place
out of the reach of children. Do not place other
objects on the product.
Store the machine and the accessories in a frost free
place.
EN